Welding Fixture Cleaning, Lubrication and Fastening Procedures

1. Fixture Cleaning and Maintenance

1. Regularly disassemble fixtures for cleaning to remove dust and debris.
2. Use clean soft cloths or brushes for cleaning; do not use hard objects.
3. After cleaning, dry thoroughly without leaving water to prevent rust.
4. For high-temperature fixtures, wait for cooling before cleaning.
5. Apply a small amount of machine oil or degreaser on fixture surfaces for protection.

2. Fixture Lubrication

1. Timely add lubricating oil or grease to fixture components to improve service life.
2. Clean surfaces before using lubricants.
3. Do not use excessive lubricant to avoid contaminating fixtures.
4. After fixture operation, wipe off surface lubricant to avoid oil-dust adhesion.

3. Fixture Fastening

1. Before using fixtures, check fasteners to ensure nothing is loose.
2. Fasteners should be tightened according to torque values specified in the manual to prevent over-tightening or under-tightening.
3. Fasteners should be checked regularly; tighten if loose.
4. Replace aged or deformed fasteners promptly.

4. Other Precautions

1. Avoid overload and overspeed processing when using fixtures.
2. Do not expose fixtures to chemicals to avoid corrosion of fixture materials.
3. Store fixtures in clean, dry, and ventilated places away from humidity and sunlight.
4. Regularly check fixture airtightness to prevent compressed air leakage.