Hello Steven !
You have 3 new messages
You have 3 new messages
    Large |
|
|||||||||||||||||
| SEMI-UNIVERSAL INDEX CENTER BS-0 BS-1( HEAD STOCK) | Unit:mm/in | |||||||||
| Model | A | B | H | h | a | b | g | Taper of center | Diameter of spindle hole | N.W.(kg) |
| BS-0 | 193(7.59") | 131(5.15") | 173(6.81") | 100(3.93") | 166(6.53") | 90(3.54") | 16(0.63") | MT2 | 18/0.71" | 21 |
| BS-1 | 242(9.52") | 168(6.61") | 220(8.66") | 128(5.04") | 206(8.11") | 113(4.45") | 16(0.63") | MT3 | 20/0.79" | 30 |
| UNIVERSAL INDEX CENTER BS-2(TAIL-STOCK)) | Unit:mm/in | |||||||||
| Model | A1 | B1 | H1 | h | a1 | b1 | g1 | N.W.(kg) | Measurement m³ | |
| BS-0 | 175(6.89") | 87(3.42") | 102(4.02") | 109(3.93") | 130(5.12") | 92(3.62") | 16(0.63") | Packed with Dividing Head | ||
| BS-1 | 183(7.20") | 87(3.42") | 137(5.39") | 128(5.04") | 158(6.22") | 110(4.33") | 16(0.63") | Packed with Dividing Head | ||
| Standard Accs.: Dividing plate A,B,C. | ||||||||||
| Numbers of holes of dividing plate (worm gear reduction ratio 1:40) | Unit:mm/in | |||||||||
| Numbers of hole | Dividing plate A | 15 | 16 | 17 | 18 | 19 | 20 | |||
| Dividing plate B | 21 | 23 | 27 | 29 | 31 | 33 | ||||
| Dividing plate C | 37 | 39 | 41 | 43 | 47 | 49 | ||||
| SEMI-UNIVERSAL INDEX CENTER BS-0 BS-1( HEAD STOCK) | Unit:mm/in | |||||||||
| Model | A | B | H | h | a | b | g | Taper of center | Diameter of spindle hole | N.W.(kg) |
| BS-0 | 193(7.59") | 131(5.15") | 173(6.81") | 100(3.93") | 166(6.53") | 90(3.54") | 16(0.63") | MT2 | 18/0.71" | 21 |
| BS-1 | 242(9.52") | 168(6.61") | 220(8.66") | 128(5.04") | 206(8.11") | 113(4.45") | 16(0.63") | MT3 | 20/0.79" | 30 |
| UNIVERSAL INDEX CENTER BS-2(TAIL-STOCK)) | Unit:mm/in | |||||||||
| Model | A1 | B1 | H1 | h | a1 | b1 | g1 | N.W.(kg) | Measurement m³ | |
| BS-0 | 175(6.89") | 87(3.42") | 102(4.02") | 109(3.93") | 130(5.12") | 92(3.62") | 16(0.63") | Packed with Dividing Head | ||
| BS-1 | 183(7.20") | 87(3.42") | 137(5.39") | 128(5.04") | 158(6.22") | 110(4.33") | 16(0.63") | Packed with Dividing Head | ||
| Standard Accs.: Dividing plate A,B,C. | ||||||||||
| Numbers of holes of dividing plate (worm gear reduction ratio 1:40) | Unit:mm/in | |||||||||
| Numbers of hole | Dividing plate A | 15 | 16 | 17 | 18 | 19 | 20 | |||
| Dividing plate B | 21 | 23 | 27 | 29 | 31 | 33 | ||||
| Dividing plate C | 37 | 39 | 41 | 43 | 47 | 49 | ||||
