| Price: | Negotiable |
| Min.Order: | 1 |
| Supply | 876 |
| Delivery: | Shipment within 1 days since the date of payment |
| Address: | China Guangdong |
| Valid until: | Never Expire |
| Updated on: | 2024-07-01 14:30 |
| Views: | 296 |
Kaili Industrial Zone,No.389, Guangzhu Road, Dagang Street, Nansha
CNC Automatic Sink Rolling Seam Welding Machine
（FNC-200K）
This CNC sink welding special machine utilizes the seam welding principle to replace the spot welding electrode with circle welding wheel. When the welding wheel rolls continuously or intermittently under continuous or intermittent current pulse, the welding seam which is composed of a series of welding spots will be formed. However, the distance between welding spots will be reduced which will make the nugget overlap with each other. When the overlap degree exceed 1/3 of the diameter of the nugget, then a certain degree of air tightness welding will occur. For the sake of ensuringthe stability of welding quality, medium frequency inverter power source will be adopted. Adopt the professional automatic control system, as long as input the data like coordinate data of the position of welding products, welding current, etc., then after turning on the machine, the welding track will automatically finish weldingproduct within the preset procedure. The workers only need to put the work piece onto certain placeand then take it away when finishing welding.Use the servo motor to drive axle X (locating mould) and axle Y (welding electrode) to operate under the preset procedure of PLC data. It could store 15 sets of welding models at most (be able to store 15 sets of welding position and welding current of product). According to the stored position of welding spot, the welding product will be located inside the mould and moves horizontally along the X direction and the moving area should be no more than 1200mm. The welding electrode will be designed to move vertically along the Y direction and the moving area should be no more than 600mm. The welding electrode moves from top to bottom within 300mm along the axle Z direction and be able to conduct 360° of rotation under the control of servo motor so it is suitable for welding different angles of products. Model FNC-200K Input Power Three-phase 380V±10% 50Hz Rated Capacity 200KVA Rated Duty Cycle 50% Maximum Secondary Circuit Current 31000A Insulation Grade Of Welding Transformer Grade F Time Adjustment Range Of Program Segment 0～9999ms Heat Adjustment Range 15%～99% Power Grid Voltage Fluctuation Compensation When the voltage fluctuates between±10%, the secondary voltage fluctuates between≤±3% Welding Wheel Diameter 100-120mm Welding Wheel Width 3-5mm Welding Wheel Speed 1800-4000mm/min adjustable X Axle Moving Range ≥1600mm Y Axle Moving Range ≥600mm Z Axle Moving Range ≥350mm A Axle Moving Range 360° Rated Air Pressure 0.8MPa Air Consumption 1m3/h Water Pressure 0.2Mpa Water Temperature 10-20℃ Cooling Water Consumption 1000L/H
Suitable for welding the sink within the range of 1200mmx600mm x400mm.
Main Technical Parameter Datas:
